egoman Posted April 18, 2014 Share Posted April 18, 2014 Which sanctioning bodies roll cage specs are you using for road race car construction. I have no problem building to the specs, I just need to know what they are.See I have been practicing. Link to comment Share on other sites More sharing options...
Al Marcoux Posted April 18, 2014 Share Posted April 18, 2014 Hey Egoman, WCMA. Here's the link http://wcma.ca/2013/2013%20Technical%20Regulations%20-%20Race.pdf On the left side of that page scroll down to the bottom called appendix 1 roll cage specifications. If you have any other tech question please don't hesitate to get a hold of me. Make sure the cage is welded like your image. Lol . Road race tech inspectorIce race directorHot lap co-ordinatorAl Link to comment Share on other sites More sharing options...
egoman Posted April 18, 2014 Author Share Posted April 18, 2014 I did say I had been practicing Link to comment Share on other sites More sharing options...
nopistons Posted April 18, 2014 Share Posted April 18, 2014 Important items to note are the bend radius and the deformation amount. A standard bender will not work w/o kinking or deforming the tubing. You will need a draw shoe type such as Drake, JD2 etc etc. Link to comment Share on other sites More sharing options...
egoman Posted April 19, 2014 Author Share Posted April 19, 2014 I wouldn't worry about that too much, I kinda know what I am doing. Link to comment Share on other sites More sharing options...
Al Marcoux Posted April 19, 2014 Share Posted April 19, 2014 Also material must be DOM . Call me if you have any questions 291 7006 Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.